Laser-Cut R/C Kits
Swept Back. Forward Thinking. Retro Goodness.
Our Comet captures all of the jet-age looks and excitement of the sleek 1950’s design it’s based on.
With the included jigs, this delta wing can easily be built by those with experience in constructing built-up kits. Please note that this is NOT a beginner's kit - it requires building and flying experience to be successful.
Flying the Comet is a blast. It’s not overly quick and has pleasing flight characteristics that make it fun to fly. Even at low speeds it is well behaved and has no surprising tendencies.
The Comet can be powered with either an electric or glow powerplant. We’ve designed the fuselage with built-in hatches so you have quick access to either your batteries, fuel tank & radio system.
Our Comet was reviewed by Greg Gimlick in Model Aviation magazine. Check out his video report below...
Specifications:
Wingspan: 39.5 inches
Wing Area: 470 square inches
Length (airframe only): 32 inches
Weight: 3 - 3.5 pounds
Radio:
• 4 channel system (with elevon mixing)
• 3 40-70 in./oz. servos (Standard servos - similar to 
HS-311)
• 1 additional servo for throttle, if using a glow engine
Power:
• Electric: .25-sized brushless motor, 60amp esc, 3s lipo
• Glow (.19-.30 engine, 4 ounce tank, fuel tubing)
Thinking of going electric? Click the icon to the left for suggested motor, ESC, battery and prop combinations, courtesy of Innov8tive Designs. 
WARNING: This product (wheel collars) can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
