Laser-Cut R/C Kits
"Achtung! Come fight mit me!"
Fast, but not too fast. Maneuverable, but not tricky. A snap to build and surprisingly rugged compared to most.
The original Sunday Fighters were the brainchild of Ken Willard back in the early 1970s. His were small,.049-powered 3-channel models and proved quite popular. Now, we've taken this idea, enlarged it, and re-engineered it to make them as fun to build as they are to fly.
You should see them take evasive maneuvers in Dog Fighting. Evade with snap rolls into spins, Immelmann turns, and a loop. Our radio-controlled Sunday Fighter airplane kits just might be the most fun you’ve had in a long time.
Because of the interlocking design and high-quality laser cutting of the parts, the Sunday Fighter is a quick build. Not only does it build quick, but it also builds straight and true, as all of the parts are designed to align properly with a minimum of fuss and alignment tools.
The wings are removable for storage/transport and for giving access to the extra-large cabin area. From there, you have easy access to install most any brand of radio and control linkages. However, the fully assembled model can fit in the trunk of most mid-sized cars.
Up front, we’ve designed a hatch that covers the battery/tank compartment. This area will easily handle 3s packs and 6-ounce tanks.
Whether you choose to power your Sunday with electric or glow power, we’ve got you covered. Glow engines can be mounted side, inverted, or even upright with a little modification. Electric motors can be mounted using the included Motor box, which will help space your motor at the proper distance.
Go true "old-school" with 3-channel control, or opt for functional ailerons (4-channel).
This is just one design in our growing Sunday Fighter series. See them all at this link.
Specifications:
Wingspan: 46.5 inches
Wing Area: 725 sq inches
Length (airframe only): 34 inches
Weight: 3.5 - 4 pounds
Radio: 3-4 channel system
• 2-4 servos (Sub-Micro servos, similar to 
HS-5065MG)
• 1 additional servo for throttle, if using a glow engine
Power:
• Glow (.20-.30 engine, 6 ounce tank, fuel tubing)
• Electric (equivalent brushless motor, 3s LiPo)
Thinking of going electric? Click the icon to the left for suggested motor, ESC, battery and prop combinations, courtesy of Innov8tive Designs.
WARNING: This product (wheel collars) can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
